Operating instructions

Setup – Application 1 Calculation Decimal places in None
Application (Basic settings) calculated result 1 decimal place
parameters ο 2 decimal places
3 decimal places
4 decimal places
5 decimal places
6 decimal places
Density
1)
Differential weighing
1)
Application 2 Off
(Control functions)
ο Checkweighing Activation of ο Within checkweighing range
port lines Always on
Stability and
checkweighing range
At stability
Stability + checkweigh.
range on (only once)
Type of check- ο Target, min., max. weight
weighing input Minimum, maximum weight
Target, min. in %, max. in %
Weight display ο Absolute value
mode Difference from the target
Automatic printout Yes
of OK values ο No
Time-controlled Function after Beep
functions time interval Lock in readout
ο Automatic printout of values
Store value in applicat. 3 memory
(totalizing, formulation, statistics)
Automatic function ο On
restart Off
Storage mode ο Without stability
After stability
After higher stability
Print then tare Off
ο On
Application 3 see following pages
1
)=For details on using the “Differential Weighing” application, please refer to the operating instructions for Master
pro
LA balances, available
on request from Sartorius or by Internet download (www.sartorius.com → Laboratory Mechatronics → Downloads; file name: “LA.pdf”).
27
Factory setting
Factory setting