Operating instructions

Additional Functions

In addition to the functions for:

– alphanumeric input,

– taring (not during alphanumeric input),

– printing (NUM print; S ID),

you can also access the following

functions from this application:

Calibration/Adjustment

§ Press the

isoTST soft key

> See “Calibration/Adjustment”

for further instructions

Toggling to the Next Application

§ Press D

> See the section on the corresponding

application program for further

instructions

Setup (setting parameters)

§ Press H

> See “Configuration” for further

instructions

Turning Off the Scale

§ Press e

> The scale shuts off

Practical Example

Toggle the Display From Grams [g] (1st Unit) to Pounds [lb] (2nd Unit)

Settings (changes in the factory settings required for this example):

Setup: App: Application 1: Toggle wt. units: Weight unit 2: Pounds/lb

Step Key (or instruction) Display/Output

1. Delete previous setting if necessary c

(

$: Weight unit 1)

2. Change weight unit to Pounds [lb]

lb soft key

(

%: Weight unit 2)

3. Change weight unit

g soft key

to Grams [g]