Operating instructions

Weighing in Percent

Examples

Practical Example: Weighing in Percent with Reference Weight Taken From Weight on Scale

Settings (changes in the factory settings required for this example):

Setup: Application parameters: Application 1: Weighing in percent

Setup: Printout: Application-defined: Auto print on init: All values

Step Key (or instruction) Display/Output

1. Delete previous setting if necessary c

2. Prepare a container Place the empty container

for the parts on the scale

3. Tare the scale t

4. Place the reference weight Place weight equal

on the scale to reference weight in

(here: 1821.48 g = 100%) the container

5. Initialize the scale

Start soft key

6. Unload the scale Remove reference

sample from the container

7. Determine the percentage Place sample to be

of an unknown weight measured in the container

8. If desired, print percentage p

(here: 98.37%)

pRef + 100 %

Wxx% + 1821.48 g

Prc + 98.37 %