Operating instructions

Practical Example

Determining Animal Weight With Automatic Start of 20 Subweighing Operations for Averaging;

Automatic Printout of the Number of Subweighing Operations and of the Animal Weight

Settings (changes in the factory settings required for this example):

Setup: Application parameters: Application 1: Animal weighing: Animal activity: Active

Setup: Application parameters: Application 1: Animal weighing: Printout: Average and calculated values

Setup: Printout: Application-defined: Auto print upon initialization: All values

Step Key (or instruction) Display/Output

1. Delete previous setting if necessary c

2. Prepare a container (cage) Place empty cage

on the scale

3. Tare the scale t

4. Enter number of subweighing 2 0

operations for averaging

5. Save number

mDef soft key

6. Weigh the first animal Place 1st animal in cage weight value fluctuates due to animal activity

7. Start automatic animal weighing

Start soft key

The scale delays starting the subweighing When this criterion is met,

operation until three successive the subweighing series begins

subweights lie within the range defined

for an “active” animal