Operating instructions

Practical Example

When weighing in formulation components, the second component is over-poured.

Settings (changes in the factory settings required for this example):

Setup: Application parameters: Application 1: Recalculation

Step Key (or instruction) Display/Output

1. Delete previously stored values, c

if necessary

2. Place container for filling Place empty container

components on the scale on the scale

3. Tare t

4. Add the first component Weigh the first component

into the container

5. Store component Press the

Comp.1 Comp1 + 25.08 g

6. Add the second component Weigh the second

component into the container

7. Start recalculation, because

Recalc soft key

10.73 g were poured rather

than 10.60 g

8. Either press the minus

Minus soft key repeatedly

key to correct the value …