Operating instructions

Fastening the Display and Control Unit to the Front of the Weighing Platform
or Mounting It Separately
§ Turn the scale over and place it on a cushioned surface to prevent damage to the
weighing system
§ Fasten the retainer to the display and control unit using the two Phillips head
screws 1 (M4x12)
§ Fastening the display and control unit to the weighing platform: Fasten the retainer
with the two Phillips head screws 2 (M4+ 12) to the weighing platform
§ Press the cable into the raceway (channel) as shown in the diagram on the left
> Cable length: 55 cm (21.7 inches)
$ To order a longer cable, see the section entitled “Accessories”
FCG34EDE-H, FCG34EDE-P, FCG16EDE-S, FCG12EDE-P,
FCG64EDE-S, FCG64EDE-H
Installing the Display and Control Unit on the Column
§ Use the two Phillips head screws (M 4+ 8) supplied to fasten the display and
control unit to the column
§ Attach the column to the scale using the screw (M 4+ 20)
§ Fasten the connecting cable to the column using the three clips
9