User manual

29
System Settings (Setup Menu)
User Manual for Secura, Quintix, Practum
Safety Level
The Secura
®
models monitor the following at all times:
– whether the balance is leveled correctly
– whether adjustment is necessary
– whether minimum sample quantity requirements are met according to USP.
Safety level menu option (Secura
®
only):
t Select the desired safety level for SQmin, isoCAL, and LEVEL
If a verified balance has not been leveled, the following functions will be disabled
immediately (as is the case with the “High” safety level):
– Printout
– Startup and saving of application
Here, it does not matter what settings this menu item has.
High (factory setting): If one of the three conditions has not been met, a warning is
displayed straight away. No data is transmitted.
The following functions are disabled immediately:
– Printout
– Startup and saving in applications
Displays:
– Information about red marking of display element (LEVEL, isoCAL or SQmin)
– Weight value displayed in gray with a black warning symbol
A warning is displayed after 60 seconds in the event of non-observance.
Standard: If one of the three conditions has not been met, a warning is displayed
straight away.
Displays:
– Information about red marking of display element (LEVEL, isoCAL or SQmin)
– Weight value displayed in gray with a black warning symbol
A warning is displayed after 60 seconds in the event of non-observance.
Printout:
– Weight values are marked with “!”
Low: The following information is displayed:
– SQmin value has not been achieved -> SQmin value is marked red
– Balance not leveled -> Red marking on “LEVEL” display element
– Balance not adjusted due to temperature or time -> Red marking on “isoCAL”
display element
Weighing
SQmin
Application
Stability signal
Ambient conditions
Safety level