User manual

System Settings (Setup Menu)

User Manual for Secura, Quintix, Practum

Identifier (Secura

only)

Identifier

Set device ID

Set additional ID

Batch ID function

Sample ID function

Define identifiers for the printout via the g button and in the ISO/GLP printout

here. Under Printout in Manual print, the ISO/GLP printout option must be

activated. IDs can be a maximum 14 characters long.

Set device ID menu option:

The device identification (ID) is printed in the header of the GLP printout.

t To activate the device ID, select t, enter the desired device ID, and confirm

withl.

Set Additional ID menu option:

The additional ID (A ID) is also printed in the header of the GLP printout.

t To activate the additional ID, select t, enter the desired device ID and confirm

with l.

Batch ID function menu option:

The batch ID (LID) is queried one time at the start of the GLP printout.

t Activate this option to enter or print out the batch ID.

Sample ID function menu option:

The sample ID (SID) can be activated for each printout by selecting the g button

on the balance display.

t Define settings for printing the sample ID.

– On: The sample ID is activated. This ID is queried before each printout.

– Autom. increment: Select this option to automatically assign the sample

ID in ascending order.

– Autom. decrement: Select this option to automatically assign the sample

ID in descending order.

– Off: The sample ID is deactivated.

To enter and delete figures and text, e.g., for the sample ID, see “Enter Figures on the

Keypad” on page22.