Operating instructions

Signum 1-2-3
Data Interface
89
Error Message:
P os. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
S t a t * * * * * E r r * * # # * * * * CR LF
o r S t a t * * * * * E r r * # # # * * * * CR LF
*: Space
#: Error code number (2 or 3 digits)
ID Code Characters:
Character K Meaning
G# Gross value
N Net value
T Application tare memory 1
T2 Application tare memory 2
Diff Difference from calibration value
Targ. Exact adjustment weight value
Nom. Exact calibration weight for SBI protocol output
nRef Reference sample quantity
pRef Reference percentage
wRef Reference piece weight
Qnt Result from Counting (piece count) and
Neutral Measurement applications
mDef Target value for animal weighing
x-Net Animal weighing results
Setp Target value for checkweighing
Diff.W. Absolute difference (e.g. in kg) for checkweighing
Lim Deviation in % in Checkweighing
Max Upper tolerance for checkw.
Min Lower tolerance for checkw.
Stat Status
Classx Classification
Limx Class limit
D Percentage (as loss)
Prc Percentage (as residue)
Wxx% Reference percentage weight
Cmpxxx Component xxx
Cont.T Contents of the tare memory in Net-total
Formulation
S-Comp Total of initial weighings for Net-total
Formulation
PT2 Preset tare
n Transaction counter
*G Sum of gross weights in Totalizing
*N Sum of net weights in Totalizing
Ser.no Serial number of the platform or indicator
Example (output of weight value of +1255.7 g):
P os. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22
G # * * * * + * * * 1 2 5 5 . 7 * g * * CR LF
Positions 1-6: ID code, right-justified with spaces
Position 7: Plus +, or minus - or space
Position 8: Space
Positions 9-16: Weight value with decimal point;
leading zeros are output as spaces.
Position 17: Space
Positions 18-20: Characters for unit of measure or space
Position 21: Carriage return
Position 22: Line feed
! If the weight value is output with 10-fold increased resolution,
this value is not permitted to be printed or saved in a weighing
instrument operated in legal metrology in the SBI mode.
In this case, the unit symbol is not included with output.
Configuring the Data Interface as a Printer Port
(printer)
You can connect one or two strip printers or one or two label
printers to the Signum
®
. Configure the COM1 and UniCOM
interfaces as printer ports under the Printer menu item.
There are several actions that generate the command for outputting
data to the printer port:
– Pressing the p key. If the operating menu is active, all menu
settings under the active menu level are printed.
– Upon receipt of the “Esc k P _” SBI command. For details, see the
section entitled “Data Input Format” in this chapter.
– In some applications, pressing a given key (e.g., to save a value
or start a routine) also generates a print command. In this case,
a configurable printout is generated with application-specific data.
The P and b symbols are displayed when data is being output to
the printer port.