Product data

59
Signum 3 Ex
Weighing in Percent Application L Weighing in Percent Application L
Example:
Weighing in 100% of a sample material
Settings (different from the factory settings):
Setup: Application 1: Weighing in percent
Setup: Printout, PRTPROT 76, then select the menu line items of your choice
1) Place empty container on the
platform
)
2) Tare the scale
Note: If the automatic tare
function is enabled, you do
not need to press the ) key
to tare the platform; the tare
weight is saved automatically
when you place the container
on the platform
3) Add reference material in
accordance with reference
percentage (in this example,
85 g)
O
4) Begin calculation of reference
weight The calculation is
based on the active net weight
value and the reference
percentage entered
If the weight is too light,
an error code is shown in
the main display Inf 29
Reduce the minimum load
setting
5) Continuing filling the
container until the target
amount is reached (in this
example, 100%)
p
6) Print the results
pRef + 20 % see
wRef + 0.085 kg Configuring Printouts
G# + 1.080 kg
T + 0.675 kg
N + 0.423 kg
Prc + 100 %
-------------------