Quick Reference Guide Includes Batteries Tripod Accessory Lanyard USB Cable
Key features Step 1 Open grip Step 2 Load batteries Lock Bar Adjustment wheel Action Button Grip LED USB Connector Cable LED Record Button Battery Door 2x AA Batteries Battery Door 2x AAA Batteries
Step 4 Power on marker Step 3 Power on base Press and hold the Record button until LED indication as shown Press and hold the Record button until LED indication as shown
Step 5 Horizontal motion Step 6 Vertical motion Step 7 Adjusting for your device Before continuing ... « Step 8 « Step 11 Once connected, just move your hand. Press and hold Action button, then move your hand. Turn adjustment wheel to adapt. Tight sliding fit desired. Should not require force.
Step 8 Connecting your device Step 9 Attaching your device For more information on cable use in other device orientations, go to: www.swivl.com/support Remove cable from rear. Follow prompts to download the Swivl app. * Note: Requires Internet connection. Wrap cable around base, insert device and depress the lock bar. If lock bar does not stay fully depressed, remove device, tighten adjustment wheel and repeat.
Step 10 Video Recording Step 11 Attaching a camera To record, simply hit the record button once, and again to stop. Screw tripod accessory into the tripod adapter on your camera. Insert similarly to step 9. Tripod Accessory * Skip Step 11 and proceed to Step 12.
Step 12 Learn more about your * For more information, go to www.swivl.com/support Satarii, Inc. 1354 El Camino Real San Carlos, CA 94070 www.swivl.com Customer Support 1 888 837 6209 support@swivl.com TM and © 2012 Satarii Inc. All rights reserved. Swivl, the Swivl logo, Satarii and all other company, product and service names or slogans are trademarks of Satarii, Inc. Patent pending. iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.