Installation & Assembly

LED BACK LIT DIRECT
WIRE LINEAR DOWNLIGHTS
Models: S11720, S11721, S11722, S11723, S11724
Satco Products, Inc.
Brent wo od, NY 11717
• Installation requires knowledge of electrical systems.
If not qualied, do not attempt installation. Contact a
qualied electrician.
• Do not use if xture housing is damaged.
• To reduce risk of re and over-heating, conrm all
connections are secure.
• TURN OFF the electrical power before proceeding.
• Direct wire linear downlights must be installed in accordance
to the dimensions and features shown in the installation
instructions.
• These linear downlights are rated for IC or NON-IC
installations.
• These products are approved for use in damp locations.
• The direct wire linear downlights are dimmable.
Please visit our website www.Satco.com for dimmer
compatibility list.
• To prevent wiring damage or abrasion, do not expose
wiring to edges of sheet metal or other sharp objects.
• Do not make or alter any openings in the wire housing
or make any modications to the electrical components.
• Do not alter, relocate or remove wiring, lamp holders,
power supply or any other electrical component with
the xtures.
INSTALLATION AND SAFETY INSTRUCTIONS
IMPORTANT: Read before installing xture. Retain for future reference.
© Copyright 2019 Satco Products, Inc. 10/19
Minimum Space Requirement
WARNING: Risk of Fire or Electric Shock
S11720: 300(L) x 200(W) x 120(H) / 11.8" x 7.87" x 4.72"
S11721: 450(L) x 200(W) x 120(H) / 17.7" x 7.87" x 4.72"
S11722: 600(L) x 200(W) x 120(H) / 23.6" x 7.87" x 4.72"
S11723: 800(L) x 200(W) x 120(H) / 31.5" x 7.87" x 4.72"
S11724: 1200(L) x 200(W) x 120(H) / 47.2" x 7.87" x 4.72"