MSDS
Page 1 of 2
LAMP MATERIAL INFORMATION SHEET
TUNGSTEN HALOGEN LAMPS
_____________________________________________________________________________
MATERIAL SAFETY DATA SHEET (MSDS)
Information and Applicability
The Material Safety Data Sheet (MSDS) requirements of the Occupational Safety and Health
Administration (OSHA) for chemicals are not applicable to manufactured articles such as lamps.
No material contained in a lamp is released during normal use and operation.
The following information is provided as a service to our customers. This Lamp Material
Information Sheet contains the Material Safety Data Sheet information that is applicable.
_____________________________________________________________________________
SECTION 1: PRODUCT IDENTIFICATION
Trade Name: SATCO
• This data sheet is inclusive of all screw based tungsten halogen SATCO brand lamps for
general lighting applications.
SATCO Products, Inc.
110 Heartland Blvd.
Brentwood, NY 11717
Phone: (800) 437-2826 or (631) 243-2022
_____________________________________________________________________________
SECTION 2: LAMP MATERIALS AND HAZARDOUS INGREDIENTS
Glass
These Tungsten Halogen lamps are manufactured with standard lime glass envelope or a heat-
resistant glass and the burner is composed of a quartz glass envelope surrounding a tungsten
wire filament. The bulb contains iodine or bromine halogen gas.
Diffusing Material
If the coating is on the interior of the lamp, it is either specially prepared Kaolin clay (Frosted,
Standard or Soft-White lamps). If the coating is on the exterior of the lamp, it consists of a fired
glass material containing a suitable pigment.
Metals
In addition to the tungsten lamp filament, other wires made from molybdenum, copper, iron,
and/or nickel are used as support wires or for electrical connections. Lamp bases may be either
brass or aluminum and contain a lead solder.
_____________________________________________________________________________