Users Manual

Satcube Ku User Manual v2.3-2020
SATCUBE PROPRIETARY
c) Stow the terminal
• Loosen the lock on the adjustment wheel and fold the terminal. Make sure the latch on the
upper antenna part is clasped tightly on to the base of the unit. Stow the terminal and the
batteries in the provided case to avoid damage.
Cleaning and maintenance
a) General guidelines
• In order to make sure the terminal is working as intended and to maximize the lifetime the
following cleaning and maintenance routine should be adhered to. Failure to adhere to the
cleaning and maintenance guidelines in this section can cause permanent damage to the
terminal and reduce the terminal’s lifetime.
• If any damage is found, it should be reported immediately to Satcube support. A faulty
terminal may cause harm to humans and other equipment and should not be used.
• During cleaning and maintenance, the terminal should be inspected for damages or faults. If
any harm has come to the terminal, please check in with Satcube support to assess if proper
and safe handling of the terminal is still possible.
• Every use: Make sure the fans can move freely and no excessive dust is present.
• Failure to check fan mobility might cause the terminal to overheat and cause permanent
damage.
b) Cleaning the fans
• The cleaning is done by unscrewing the four T-10 torx screws attaching the fan cover to the
terminal shown in Figure 24. The fans are then detachable from the terminal and can be
cleaned or changed which is seen in Figure 25.
Figure 24 Fans behind fan cover.
Figure 25 Fans disassembled for maintenance.