User Guide

Note: If the SSD is new and not discovered, it may need to be formatted to be read by macOS. To reformat, open
Disk Utility > Select the SSD installed > Erase > then select APFS > and then reformat the drive by erasing it.
!
Connect USB peripherals, SD cards, and headphones.
USB-A ports do not support charging or CD drives,
including Apple SuperDrive.
6
Place the stand on a flat surface and use its USB-C
cable to connect to your Mac mini.
Supports Mac mini (2018 & newer)
5
Put the enclosure cover back on and flip stand back
over.
4
Use the included screwdriver and screw to secure the
SSD.
To avoid stripping the screw, please do not overtighten.
3
To install, insert the SSD at a slight angle and it should
click into place.
Important: Compatible with only M.2 SATA SSD drives.
Does not work with NVMe.
2
Remove SSD enclosure cover on the bottom of the
stand.
1
STAND & HUB FOR MAC MINI
WITH SSD ENCLOSURE
INSTRUCTIONAL GUIDE