User manual

User Manual INTEGRA 8
In case of the LCD keypad, the partitions indicated by the installer will be armed. In case of
the partition keypad, the partition to which the keypad is assigned will be armed. The types of
armed mode are described in section SYSTEM ARMED MODE.
Press and hold down simultaneously the S and T keys for approx. 40 seconds to restart the
keypad and display the information about keypad and control panel firmware version.
6.1 LCD KEYPADS
SATEL offers a wide range of keypads which enable operating the INTEGRA alarm control
panels. The INT-KSG keypad with touch keys is described in a separate manual.
6.1.1 Keypads with mechanical keys
SATEL's portfolio includes the following mechanical keypads:
− INT-KLCD-GR/INT-KLCD-BL
− INT-KLCDR-GR / INT-KLCDR-BL
− INT-KLCDK-GR
− INT-KLCDL-GR / INT-KLCDL-BL
− INT-KLCDS-GR / INT-KLCDS-BL
These keypads differ by their size, shape and current consumption. The INT-KLCDR-GR /
INT-KLCDR-BL keypad incorporates a built-in proximity card reader. Most of the keypads are
available in two versions: with green or blue display and key backlight of the same color.
Designation of the models with green display ends with "GR" letters, and that of the models
with blue display – with "BL" letters.
Fig. 1. View of INT-KLCDR-GR keypad.