User manual

User Manual INTEGRA 12
• Auto arming delay countdown (timer-controlled partitions) – a series of 7 sounds
(of diminishing length).
• Chime in LCD keypad – five short beeps – this is a response to activation of some
detectors when the zone is disarmed.
6.1.3 Using LCD keypad
Operation of the system from LCD keypad starts with entering the user CODE and pressing
the key marked [#], [ok] or [
*
]. The control panel response (accessible functions) after
pressing the [#] or [ok] key is different than that after pressing [
*
].
[CODE][#] or [CODE][ok] you get access to functions of arming/disarming type,
[CODE][
*
] you get access to all functions in the user menu to which the user
is authorized.
Example: When you enter your code and press [#], the control panel will make available the
functions of partition arming (provided that no partition, operated from the LCD keypad, is
already armed) or disarming (if any of partitions is armed). In the event of alarm occurrence
in the system, the control panel may cancel this alarm and provide access to the function of
partition disarming (if the user is authorized to do that). When the function of telephone
messaging is activated – the CLEAR VOICE MESSAGING function may appear in menu. When
the user has access to a single partition only, entering the code and pressing [#] results in
immediate arming or disarming (if the partition is armed).
Entering the code and pressing [
*
] displays the list of functions accessible from the USER
MENU. The USER MENU provides also access to the following functions: ARMING and
DISARMING (if some partitions are armed). When all partitions are armed, the function ARMING
will not be accessible.
Note: Entering a wrong code (not recognized by the panel) three times may:
− trigger an alarm PROG,
− block a keypad for 90 sec. After this time each next wrong code entering will block
the keypad PROG.
The specific feature of the control panel is the dynamic changing of the accessible menu,
dependant on the system programmed parameters, as well as on the authorization level of
the user who entered the code. The user get access only to those function in the user menu
to which he is authorized.
In order to call some functions more quickly, the user can use some SHORTCUT KEYS.
Having called the menu ([CODE][
*
]), type in the suitable digit or combination of digits – the
control panel will enter directly the called function.
The following user functions are assigned to the digits / combinations of digits:
1 Change own code
2 Users/Masters
21 New user / New master
22 Edit user / Edit master
23 Remove user / Remove master
Note: The shortcuts to the MASTERS submenu and functions available therein are only active
when the service is not authorized to edit users.
3 none
4 Zone bypasses
41 Inhibit
42 Isolate
5 Events