User manual

ManualsBrandsSatel ManualsCarbon Monoxide AlarmINTEGRA

INTEGRA SATEL

6.3.2 Operation in partition keypad mode with proximity card reader (INT-SCR)

The device executes functions of the partition keypad, however it allows the users not only to

use the access code, but the proximity card as well. Presenting the card is read out in much

the same way as entering the access code and confirming it by the key. Holding the card

(for approx. 3s) is recognized as entering the access code and confirming it by the key.

Note: Entering an invalid access code (i.e. unknown to the control panel) or placing

an unknown card in proximity may:

− trigger the alarm PROG;

− block the keypad for 90 seconds. After the blocking time has expired, entering

another invalid access code / reading in an unknown card will each time block the

keypad PROG.

Functions executed after entering the access code and confirming it with the key or

presenting the card (the function to be executed depends on the user authority level, keypad

settings and security system status):

– relay activation

– disarming

– clearing alarm

– 24. MONO SWITCH output control

– 25. BI SWITCH output control

– guard round confirmation

– enabling temporary partition blocking

Note: Most of the abovementioned functions is available after enabling the LOCK [LOCK

FEATURE

] option. Availability of the functions may also depend on other keypad options

(e.g. if the lock executes the ON IF PARTITION ARMED function, most of the operations

will be unavailable). None of these limitations refers to the functions executed after

entering the access code and confirming it with the key or holding the card.

Functions executed after entering the access code and confirming it with the

key or

holding the card (the function to be executed depends on the user authority level, keypad

settings and security system status):

– arming

– disarming

– clearing alarm

– 24. MONO

SWITCH output control

– 25. BI SWITCH output control

– guard round confirmation

– enabling temporary partition blocking

Functions accessible from the partition keypad without entering the password:

– press in turn the and keys – fully armed mode;

– press in turn the

and keys – enabling the fully armed mode and bypassing zones

with enabled B

YPASSED IF NO EXIT option;

– press in turn the

and keys – armed without interior mode (stay);

– press in turn the and keys – armed without interior and without entry delay mode

(stay, delay 0);

– hold down the

key for about 3 seconds – FIRE alarm;