User manual

INTEGRA SATEL 27
• The service can add, edit and delete the object users, provided that the SERVICE CAN EDIT
option has been enabled by the master user (administrator).
• Each user of the system (except for the master) can have a telephone code assigned to
him – see section ANSWERING PHONE CALLS.
• Service code is rejected by the control panel when the service access is disabled. The
rules of the service access to the alarm system are defined by the administrator.
• If there is no master user code in the system (all master users are removed), the service
access to the system is unlimited.
• It is recommended that the master user code not to used everyday (due to possibility of
unauthorized capture). The master user should enter for himself an ordinary user code,
with “strategic" functions disabled, and he should use it for everyday work. The main
reason for this is to protect access to the service mode and prevent entering codes by
unauthorized persons.
Additionally, a code can be assigned a specific control function which will be executed after
entering the code and pressing the [#] key (see: DESCRIPTION OF USER FUNCTIONS ÆUSERS) or
after using the proximity card assigned to the given code.
The installer (using the service code) grants codes and names to the master users (one
master user per each object), as well as he defines their rights.
The service and the master user have the right to enter ordinary system users. They grant
them the authority, type and define the partitions, to which the users will have access. Also,
the ordinary user may be authorized to enter new users. The new user may only have access
to the functions and partitions which are accessible to the user who enters the new code.
Note: If the entered user is authorized to change the code, he should change it after the first
use of his code. The control panel reminds the user to perform this operation by
means of a prompt on the keypad display and an audible signal PROG.
The system saves the order in which the users are entered. The person authorized to enter
and delete the users may only remove from the control panel memory the users entered by
himself or by his subordinates. The service has the right to edit all master users (as well as to
change their codes). The master user can edit and delete all users of his object. This also
applies to the service, provided that the master user has authorized the service to manage
the users in his partition. Ordinary users have authority to edit the users they entered
themselves. This is quite convenient in case the code is lost. The supervisor of the user
concerned may enter a new code and assign it the possibility to control the system
(of course, within the range limited by the authority).
The control panel assigns a number to the users to identify them in the system. This number
is used in messages transmitted to the monitoring station and in event descriptions
(see: DESCRIPTION OF USER FUNCTIONS ÆEVENTS).
Further information on entering new users or editing the existing users can be found in
description of the USERS function (page 47).
6.7 PREFIXES
In extended systems, which require an enhanced security level, the codes used are
sometimes composed of two parts: one which is periodically changed by the master user
(prefix) and the other which is determined by the user (user code). This ensures a periodic
change of the system access codes, while the users do not have to change their codes
individually. The prefix length (from 1 to 8 digits) is determined by the installer. Two kinds of
prefixes are used in the system:
− normal – for everyday use. By default, it consists of a suitable number of digits 0 (e.g. if
the determined prefix length is 4, the default prefix is 0000);