User manual

INTEGRA SATEL 31
Reading the serial number during transmission
1. Select from the list the device which is to receive the transmission containing serial
number (depending on configuration, this can be mainboard of INTEGRA 128-WRL
control panel or ACU-100 controller).
2. Following the prompts displayed on the keypad, press the keyfob button twice, and after
the message KEYFOB READ appears press the [#] key.
6.9.2 Adding keyfob by means of DLOADX program
Adding the keyfobs is possible in the ABAX KEYFOBS window. To open the window, click your
mouse on the ABAX KEYFOBS item in the USERS menu.
In case of the INTEGRA 128-WRL control panel, the keyfob data will be displayed
automatically. These will be the data of the mainboard ABAX system (the program will not be
able to read the data from ACU-100 controllers connected to the INTEGRA 128-WRL control
panel). In case of the other control panels, it is necessary that the keyfob data be read before
the attempt of adding a new keyfob. For this purpose, click on the READ button. The program
will read data from the lowest address ACU-100 controller with keyfob support. The name(s)
of controller(s) (displayed at the top of the window) with which the control panel can
communicate will be highlighted in green (the names of controllers which cannot support
keyfobs will be highlighted in yellow).
In order to make the keyfob data uniform in all controllers, e.g. when connecting new
ACU-100 controllers to a system in which such controllers are already in operation, do the
following:
– in case of the INTEGRA 128-WRL control panel click on the WRITE TO ALL button
(the button is available when ACU-100 controllers with keyfob support are connected to
the control panel and no changes have been made to the keyfob data read from the
mainboard ABAX system);
– in case of the other control panels click on the WRITE button (before making any changes
to the read data).
Note: If there are several ACU-100 controllers working with the control panel and
communication with any of them is lost, saving the keyfob related data will not be
possible.
Entering the serial number manually
1. Click your mouse on the field in S/N column next to the name of user to whom you want
to assign a keyfob.
2. Enter the keyfob serial number and confirm with ENTER. The background color of the
field in which the serial number is shown will change to pink. After the data are written to
the ABAX system, thus ending the procedure, the background color will change to white.
Reading serial number during transmission
1. Click your mouse on the field in S/N column next to the name of user to whom you want
to assign a keyfob.
2. Click on the NEW button. The NEW window will open.
3. According to the prompt which will appear in the window, press the keyfob button and,
when the keyfob serial number is displayed in the window, press OK. The NEW window
will close and the keyfob serial number will be shown in the S/N column, next to the user
name. The background color of the field in which the serial number is shown will change
to pink. After the data are written to the ABAX system, thus ending the procedure, the
background color will change to white.