User manual

User Manual INTEGRA 32
6.9.3 Removing keyfob by means of LCD keypad
1. Start the REMOVE ABAX KEYFOB function ([service code][
*
] ÆMASTERS ÆNEW MASTER/EDIT
MASTER
ÆREM.ABAX KEYFOB or [code][
*
] ÆUSERS ÆNEW USER/EDIT USER ÆREM.ABAX
KEYFOB
).
2. When the keyfob number is displayed, press the key [1].
6.9.4 Removing keyfob by means of DLOADX program
Removal of the keyfobs is possible by using the ABAX KEYFOBS window, after the keyfob data
have been read (see section: ADDING KEYFOB BY MEANS OF DLOADX PROGRAM).
1. Click your mouse on the field in S/N column next to the name of user whose keyfob you
want to remove.
2. Click on the DELETE button.
3. A window will open. Confirm your intention to remove the keyfob by clicking your mouse
on the YES button. The keyfob serial number will be deleted. The background color of the
field in which the serial number is shown will change to pink. After the data are written to
the ABAX system, thus ending the procedure, the background color will change to white.
6.9.5 Assigning zones to buttons by means of LCD keypad
Assigning zones to a button/combination of buttons is made possible by the functions
available when adding/editing administrator ([service code][
*
] ÆMASTERS ÆNEW MASTER/EDIT
MASTER
ÆBUTTON 1/BUTTON 2/BUTTON 3/BUTTON 4/BUTTON 5/BUTTON 1 AND 5) or user
([code][
*
] ÆUSERS ÆNEW USER/EDIT USER ÆBUTTON 1/BUTTON 2/BUTTON 3/BUTTON 4/
BUTTON 5/ BUTTON 1 AND 5).
1. Start the selected function.
2. Using the S andT keys, select a zone from the list or enter the zone number from the
keypad.
3. Press the [#] key.
A
B
Fig. 9. APT-100 keyfob. A – numeration of LEDs. B – numeration of keyfob buttons.
6.9.6 Assigning zones to buttons by means of DLOADX program
Assigning zones to keyfob buttons is possible in the ABAX KEYFOBS window after reading the
keyfob data (see section ADDING KEYFOB BY MEANS OF DLOADX PROGRAM).