User manual

INTEGRA SATEL 33
1. Click at the selected user in the column corresponding to the button/combination of
buttons to which you want to assign the zone.
2. Using the keyboard, enter the number of zone which is to be controlled by the button, and
confirm by pressing ENTER. Part of the field in which the zone number is displayed will
change its color to pink. After the data are saved into the ABAX system, which completes
the procedure, the field background will change its color to white.
6.9.7 Assigning the outputs to the LEDs by means of LCD keypad
The installer must determine in the service mode which system outputs will be able to be
used for confirmation and information for the keyfob users. For this purpose, the ABAX
CONFIRMATION service function should be used (SERVICE MODE ¼STRUCTURE ¼HARDWARE
¼EXPANDERS ¼ABAX CONFIRMAT.).
After the list of outputs dedicated to confirmation and information for the keyfob users has
been defined, you can proceed to assigning the outputs to the LEDs. The assignment of
outputs to LEDs in the keyfob is made possible by the function available in the process of
adding/editing the administrator (master) ([installer code] [
*
] ÆMASTERS ÆNEW MASTER/EDIT
MASTER
ÆCONFIRM. (ABAX)) lub użytkownika ([hasło][
*
] ÆUSERS ÆNEW USER/EDIT USER
ÆCONFIRM. (ABAX)).
6.9.8 Assigning the outputs to the LEDs by means of DLOADX program
Assignment of the outputs to the LEDs is possible in the ABAX KEYFOBS window after reading
the keyfob related data (see: ADDING KEYFOB BY MEANS OF DLOADX PROGRAM).
Before the outputs can be assigned to LEDs in the keyfob, you must define which system
outputs will be able to be used for this purpose:
1. Click on the first of the eight fields on the right-hand side of the window to display the list
of system outputs.
2. Select from the list the output whose status will be able to be presented on the keyfob
LEDs. The color of the field will change into pink.
3. Repeat the above steps for the next seven fields on the right-hand side of the window.
4. After all data have been saved to the ABAX system, the background color in all fields will
change into white.
After the list of outputs dedicated to confirmation and information for the keyfob users has
been defined, you can proceed to assigning the outputs to the LEDs:
1. Click at the selected user in the LED column.
2. Using the keyboard, enter up to 3 digits. The field color will change into pink. Each of the
digits corresponds to the number of the field with output selected for confirmation, i.e. can
be from the 1 to 8 range. The names of outputs in selected fields will be emboldened.
3. After the data have been saved to the ABAX system, the background color in the LED
column will change into white.
6.9.9 Configuring event generation rules by means of LCD keypad
Enabling/disabling generation of events for particular keyfob buttons is possible by using the
EVENTS (ABAX) function, which is available when adding/editing administrator ([service
code][
*
] ÆMASTERS ÆNEW MASTER/EDIT MASTER ÆEVENTS (ABAX)) or user ([code][
*
]
ÆUSERS ÆNEW USER/EDIT USER ÆEVENTS (ABAX)). To enable/disable the event generation
feature, press any numerical key. Event generation for the given button is enabled, when the
symbol is displayed in the upper line.