User manual

INTEGRA SATEL 65
• using partition numbers – in the graphic mode described below.
This is the mode for the user who exactly knows the numbers of partitions in the alarm system, or the user, who
wants to quickly check how many partitions are not armed yet.
X W Keys enabling the cursor to be moved in the graphic mode.
S T Keys enabling the keypad to be toggled between the text mode and the graphic mode.
The symbol denotes partitions, which may be armed (1, 2, 3 and 4).
X Move the cursor to the position 2 (Partition 2).
[3] Mark the
partition
for arming using any numeric key (you can press any numeric key).
[#] End the function and arm the indicated partition.
ARMING (part II: [CODE][
*
])
[1][1][1][1][
*
] Enter code – calling the user function menu.
[#] or X Start the Arm function.
Note: If all partitions made available to the given user are armed, the Arm function is not available. When
some partitions are armed, the following texts are displayed:
In this situation, do the following:
T Move down the arrow indicating the function that can be started.
[#] or X Start the Arm function.
Assuming (for this example) that Partition 2 (Book-keeping) has been already armed, then, after calling the Arm
function again and entering the graphic mode of partition selection, the keypad display will be as shown below:
It is possible now to arm Partitions 1, 3 and 4.
Example 2: DISARMING (part I: [CODE][#])
- Partition No. 2 named “Book-keeping", belonging to Object 1; user – the object master.
[1][1][1][1][#] Enter the factory default code for Object 1 administrator. You can enter the code of any user
authorized to arming/disarming in Partition 2.
By pressing [#] or X, all partitions armed and accessible to the user will be disarmed.
Á
Arm
Change own code
ÁD
i
sarm
Arm
What to arm:
Storeroom
Á
Disarm all
Disarm selected