User manual

User Manual INTEGRA 66
Note: If only one partition is armed, it will be disarmed immediately after pressing the [#] key (and the end
message will be displayed). If an alarm is signaled for the partition, it may be cleared together with
disarming.
T
Move down the arrow indicating the function that can be started.
X or [#] Start the Disarm selected function.
S or T Scroll through the list with
partition
names. Press one of these keys as many times as needed to
display the name of the required
partition
(
partition
2 – Book-keeping).
After the function is called, the control panel will display names of partitions (factory set or entered by the
installer) which may be disarmed by the user. Press X
to move to the graphic mode of
partition
selection
(selection in the graphic mode is done in the same way as when arming).
[3] Mark the partition selected for disarming – the
symbol will appear in the upper right corner of
the display (you can press any numerical key).
You may select for disarming (mark) any number of armed partitions which are accessible to you. You may also
deselect partitions selected earlier.
[#] End of function and disarming of all partitions marked.
DISARMING (part II: [CODE][
*
])
[1][1][1][1] [
*
] Enter code – call the user function menu.
[#] or X
Select the function indicated with arrow – you will be taken to the stage of partition selection for
disarming, as described in detail in the first part of this example
.
Note: When only some partitions available to the user are armed, the following texts will be displayed:
In this case you should act in the same way as when all accessible partitions are armed.
Assuming that Partition 2 is disarmed, and Partitions 1, 3 and 4 are armed, on keypad display in the graphic
mode will be as follows:
Example 3: ZONE BYPASSING (INHIBIT)
The one-time bypassing (inhibiting) the zones No. 4, named Entrance door, and No. 49, named PIR
secr.office. The user code: 38407.
What to disarm:
Workroom 1
What to disarm:
Book-keeping
System disarmed
Á
Disarm
Change own code
What to disarm:
Workroom 1
ÁD
i
sarm
Arm