User manual

INTEGRA SATEL

Notes:

• One-time bypassing (inhibiting) of the a.m. zones will be possible if they belong to partitions, which is not

armed.

• Permanent bypassing (isolating) of the zones can be performed in much the same way, however the I

SOLATE

function must be selected instead of the I

NHIBIT function.

[3][8][4][0][7][

]

Enter code – calling the user function menu.

T or S

Scroll through the list with accessible function names.

The list should be scrolled through until the

Zone bypasses text appears next to the arrow (having entered the code, you can also press the

key [4], i.e. use the shortcut to enter the Zone bypasses submenu at once).

[#] or X Enter the Zone bypasses submenu.

[#] or X Start the Inhibit function. The first of the zones that can be bypassed/unbypassed by using the

function will be displayed. The

symbol indicates that the zone is not inhibited (if the zone was

currently inhibited, the

symbol would be displayed).

T or S Scroll through the list of zones that can be bypassed/unbypassed by using the function. The list

should be scrolled through until the first zone to be bypassed appears: Entrance door.

[9] Select the zone to be bypassed – the symbol will appear in the upper right corner of the display

(you can press any numerical key).

T or S Scroll through the list of zones again. The list should be scrolled through until the second zone to

be bypassed appears: PIR secr.office.

[5] Select the zone to be bypassed – the symbol will appear in the upper right corner of the display

(you can press any numerical key).

[#] End the function and bypass the selected zones.

Zones bypassed

Inhibit

Isolate

Zone 1 bypass:▪

PIR sala

Zone 4 bypass:▪

Entrance door

Zone 4 bypass:

Entrance door

Zone 49 bypass:▪

PIR secr.office

Zone 49 bypass:

PIR secr.office

Arm

Change own code

ÁZone bypasses