User manual

User Manual INTEGRA 72
• Information on "ETHM-1 – DloadX" and "ETHM-1 – GuardX" functions has been
added in description of "Downloading" submenu (p.
59).
2010-08 1.07
1.08
• Some figures have been modified.
• Information on INT-KSG keypad has been added.
• Information on INT-CR proximity card arm/disarm device has been added.
• Since the INT-KSG keypad has been added to SATEL's offer, section "LCD
keypads" has been re-edited and modified (p.
8), and section "Using LCD keypad"
(p.
12) has been included in it.
• Information on key shortcuts in user menu has been supplemented (p.
12).
• Way of entering names from LCD keypad has been modified (p.
14).
• A note has been added to inform about the installer's option to determine the
minimum length of codes used in the system (p.
26).
• Rozdział „System armed mode” uzupełniono o informacje dotyczące załączania
i wyłączania czuwania przy pomocy modułu sterowania strefami INT-CR (s.
34).
• Section "System armed mode" has been supplemented to include information
about arming / disarming by means of INT-CR proximity card arm/disarm device
(p.
34).
• A note has been added to describe the interdependence between the "Service
message after tamper alarm" and "Do not arm if tampered" options (p.
35).
• The note about optional bypassing violated or tampered zones has been
supplemented (p.
35).
• User function menu has been rebuilt and supplemented (pp.
40-43).
• Description of "Arm (2 codes)" function has been modified and supplemented
(p.
44).
• Description of "Disarm (2codes)" function has been modified and supplemented
(p.
45).
• Description of "Change prefix" function has been modified and supplemented
(p.
47).
• Information about new "Zone isolation" right has been added (p.
49).
• Description of zone bypassing has been modified and supplemented (p.
50).
• Description of "Reset zones" function has been modified (p.
53).
• Description of "Permanent service access" option has been modified (p.
54).
• Description of new "Permanent DloadX access" option has been added (p.
54).
• Description of "Service access" function has been modified (p.
57).
• List of messages displayed in keypad when viewing troubles has been
supplemented (p.
61).
• Brief description of keypad and its available functions has been modified (p.
69).