User's Manual

SATELLINE-M3-TR1
User Guide, Version 3.0
10
1 TECHNICAL SPECIFICATIONS
1.1 SATELLINE-M3-TR1 Technical Specifications
SATELLINE-M3-TR1 complies with the following international standards:
o EN 300 113-2 (RF-requirements)
o EN 301 489 (EMC-requirements)
o EN 60950 (Safety Standard)
o FCC CFR47 section 90
o EN 61000-4-3 (2006), 10V/m Immunity test
RECEIVER
TRANSMITTER
Note!
Frequency Range
403...473 MHz
Channel Spacing
12.5 kHz / 20 kHz / 25 kHz
Programmable
See: Note 1
Tuning range
70 MHz
Spurious Radiations
< 2 nW
EN 300 113 and CRF47 part90
Frequency error tolerance
<1 kHz
Sensitivity (BER < 10 E-3)
-114dBm @12.5kHz
-111dBm @25kHz
FEC ON See:Note 2
Co-channel Rejection
>-12 dB
FEC On
Adjacent Channel Selectivity
> 47dB @12.5kHz
> 52 dB @25kHz
FEC On
Intermodulation Attenuation
>60 dB FEC ON
Blocking
>86 dB
FEC ON
Spurious Rejection
>60 dB
FEC On
Spurious Emission
<-100dBm
< -80 dBm on 3
rd
harmonics
@1215 – 1240 MHz
Power Consumption
<1.2 W
<3 W @ 0.5W output power
<7 W @ 1W output power
Power Consumption, Save
Modes
Sleep: 0.24 W typical /
DTR: 5 mW
Communication Mode
Half-Duplex
Type of Emission
F1D
Carrier power
100, 200, 500, 1000 mW
Adjacent Channel Power
EN 300 113 and CRF47 part90
Carrier power stability
< ±1.5 dB
Note 1
25 kHz channel spacing is blocked from modems used in US.
Note 2
Due to radio electronic design, the receiver is about 6-15dB less sensitive on the following
frequencies:
403.000, 409.5875, 416.000, 429.000, 442.000, 455.000, 468.000 and 469.200 MHz.