Integration Guide

SATELLINE-M3-TR3
and –TR4
Integration Guide, Version 1.6
20
6 TECHNICAL SPECIFICATIONS
SATELLINE-M3-TR3 and –TR4 complies with the following international standards:
EN 300 113-2 EN 301 489-1, -5
EN 60950-1 FCC CFR47 PART 90
RECEIVER
TRANSMITTER
Note!
Frequency Range
403...473 MHz
Tuning range
70 MHz
Minimum RF Frequency
Step
6.25 kHz
Channel Bandwidth
12.5 kHz / 25 kHz
Programmable
Frequency Stability
<1 kHz
Maximum Receiver Input
Power without Damage
+14 dBm
Maximum Receiver Input
Power without
Transmission Errors
-10 dBm
FEC ON
Sensitivity
1,2
-112 dBm @25 kHz
-116 dBm@12.5 kHz
FEC ON
Blocking
1,2
> 86 dB @ 25 kHz
> 88 dB @ 12.5 kHz
FEC ON
Intermodulation
Attenuation
1,2
> 61 dB @ 25 kHz
> 61 @ 12.5 kHz
FEC ON
CO-Channel Rejection
1,2
> -11 dB @25 kHz
> -10 dB @12.5 kHz
FEC ON
Adjacent Channel
Selectivity
1,2
> 56 dB @ 25 kHz
> 51 dB @ 12.5 kHz
FEC ON
Spurious Rejection
> 67 dB
FEC ON
Typical Power
Consumption
730 mW
RX-mode
SLEEP1: 215 mW
RX-mode
4.7 W @ 1 W RF out
TX-mode,
Continuous, 50Ω
3.3 W @ 500 mW RF
out
TX-mode,
Continuous, 50Ω
2.8 W @ 100 mW RF
out
TX-mode,
Continuous, 50Ω
2.6 W @ 100 mW RF
out
TX-mode,
Continuous, 50Ω
Transmitter Power
(programmable)
0.01, 0.1, 0.2, 0.5, 1 W
TX-mode, 50Ω
load
Communication Mode
Half-Duplex
Adjacent Channel Power
acc. to EN 300 113-
1v.1.7.1
TX-mode
Transient Adjacent
Channel Power
acc. to EN 300 113-
1v.1.7.1
TX-mode
Carrier power stability
< ±1.5 dB