User's Manual

SATELLINE-4Pro
User Guide v0.93 DRAFT
37
- RSSI value Y-102 (here -102 dBm)
of the last received message or
- current noise level e.g.
n-115
Battery level respectively on the upper
right corner.
After pressing the ”SET-UP-button the
display will show the main menu, which
is a list of modifiable parameters.
Pressing the ▲▼ buttons the cursor
moves upwards and downwards. When
the cursor > is placed beside the
desired selection, entry into sub-menu
is done by pressing the SELECT-
button.
>Radio frequency
Radio settings
Addressing
Port 1
Port 2
Handshaking
Additional
Tests
Factory setup
LCD-Contrast
EXIT ▲▼ Select
9.1.1 Changing frequency (frequency of the active TX/RX radio channel)
Press ▲ or ▼ until the cursor
> points to “Radio frequency”
–selection and press ”Select”
to move onto the next
submenu.
>Radio frequency
Radio settings
Addressing
Port 1
Port 2
Handshaking
Additional
Tests
Factory setup
Contrast
EXIT ▲▼ Select
TX & RX freq: changes both
TX and RX frequencies at the
same time.
TX freq: changes only the TX
frequency.
RX freq: changes only the RX
frequency.
Press ▲ or ▼ until the cursor
> points at the correct
selection and Press
”CHANGE” if the frequency is
to be modified.
>TX & RX freq
TX freq
RX freq
Reference freq
Ch Spacing
BACK ▲▼ Change