User's Manual

SATELLINE-4Pro
User Guide v0.93 DRAFT
38
TX & RX freq selected
The frequency Band 1limits will be shown. Press 
and to get the Band 2 limits. Press “Set” to activate
the change frequency window.
Band 1 limits
Lo 403.00000 MHz
Hi 473.00000 MHz
Cancel ▼ Set
The cursor > will now blink under the first digit of
the value indicating the (this first digit cannot be
edited). To move onto the next digit, press ”Next”.
Press ▲ or ▼ until the said digit has reached the
desired value. Press ”NEXT” to move on to the next
digit and repeat the above-described steps.
New common freq
468.52500 MHz
^
Cancel ▲▼ Next
Previous steps are repeated four (4) times.
Press ▲▼, until the last changeable digit has the
desired value and confirm changes by pressing
”Set”. The following information will be displayed
for a few seconds.
Ch accepted
468.52500 MHz
The radio modem will acknowledge changes if they
are between band limits. The display will return
automatically to display the main menu (if the
entered frequency is not acceptable an error
message will be displayed).
CF 468.50000 MHz
>468.20000 MHz
^
CANCEL ▼ SET
Ch accepted
>468.20000 MHz