User's Manual
SATELLINE-4Pro
User Guide v0.93 DRAFT
40
9.1.3 Changing radio settings (transmitter power and receiver sensitivity)
Press ▲ or ▼ until
the cursor > points
to “Radio settings”
selection and press
”Select” to move on
to the submenu.
Radio frequency
>Radio settings
Addressing
Port 1
Port 2
Handshaking
Additional
Tests
Factory setup
LCD-Contrast
Exit ▲ ▼ Select
Press ▲ or ▼ until
the cursor > points
to the setting to be
modified and press
”Change”.
>TX level
Sig.
Threshold
TX start
delay
Compatibility
Back ▼ Change
MODIFYING TRANSMITTER OUTPUT
POWER:
The displayed list consists off all possible
values of transmitter output power. Press ▲
or ▼ until the cursor > points to the desired
value and press ”SET”.
NOTE: The starting position of the cursor
indicates the previously set value.
10W
20W
25W
>35W
Cancel ▼ Set
MODIFYING RECEIVER SENSITIVITY:
The displayed list consists off all possible
values of receiver sensitivity. Press ▲ or ▼
until the cursor > points to the desired
value and press ”SET”.
NOTE: The starting position of the cursor
indicates the previously set value.
min
-118 dBm
> -117 dBm
-116 dBm .
.
-81 dBm
-80 dBm
max
CANCEL ▲ ▼ SET
MODIFYING THE TRANSMIT START
DELAY:
The display will show the current value of
the delay. Press ”Change” to modify the
value.
TX start delay
current value:
0 ms
Cancel ▲▼ Change
Press ▲ or ▼ until the first digit of the value
has reached the desired value and then
press ”NEXT” to move on to the next digit.
TX start delay
>00000 ms
^
Cancel▲▼ Next
Repeat the above described five (5) times.
:
:
Press ▲ or ▼until the last changeable digit
has the desired value and finally confirm
changes by pressing ”SET”.
TX start delay
>01234 ms
^
Cancel ▲▼ SET