User's Manual

SATELLINE-4Pro
User Guide v0.93 DRAFT
42
Select the desired
submenu (RX or TX
address) by
pressing ▲ or ▼
and finally press
”Change”.
>RX addr OFF
TX addr OFF
RX addr->RS OFF
TX add auto OFF
Back ▼ Change
Press ▲ or ▼ until the first digit of the
address has reached the desired value
and move on to the next digit by pressing
”NEXT”.
RX address
>0000 0000 OFF
^
Cancel ▲▼ Next
Repeat the above described eight (8)
times.
:
:
Press NEXT again to jump to the toggle
field (ON/OFF) and change the status to
the desired value by pressing ▲ or ▼
until correct status is reached. Confirm
the new address and status (ON/OFF
state) by pressing ”SET”.
The display will return to the previous
(higher) level submenu.
RX Address
>0123 0123 ON
^
Cancel ▲▼ Set
NOTE: Both RX and TX address modifications are done in the same way as described above.