User's Manual

SATELLINE-4Pro
User Guide v0.93 DRAFT
44
MODIFICATION OF THE NUMBER OF STOP BITS:
Press ▲ or ▼ until the cursor > points to the desired
number of STOP bits. Confirm selection by pressing
”SET”. The display will return to the previous (higher)
level submenu.
NOTE: The starting position of the cursor indicates the
previously set value.
>1 stop bit
2 stop bits
Cancel ▲▼ Set
9.1.6 Modification of handshaking functions
Press ▲ or ▼ until the
cursor > points to
“Handshaking” selection
and move on to the
submenu by pressing
”SELECT”.
Radio frequency
Radio settings
Addressing
Port 1
Port 2
>Handshaking
Additional
Tests
Factory setup
LCD-Contrast
Exit ▲▼ Select
There are three (3)
submenus relating to
handshaking parameters.
Press ▲ or ▼ until the
cursor > points to the
desired submenu
selection and press
”CHANGE”.
>CTS Clr to send
CD RSSI
RTS Ignored
Pause len 3
Back ▼ Change
DEFINING CTS-LINE FUNCTIONS:
Press ▲ or ▼ until the desired function is
indicated by the cursor > and confirm selection
by pressing ”SET”. The display will return to the
previous (higher) level submenu.
>CTS Clr to send
Buf state
Cancel ▲▼ Set
DEFINING CD-LINE FUNCTION:
Press ▲ or ▼ until the desired function is
indicated by the cursor > and confirm selection
by pressing ”SET”. The display will return to the
previous (higher) level submenu.
>RSSI
Data
Always ON
Cancel ▲▼ Set
DEFINING RTS-LINE STATUS:
Press ▲ or ▼ until the desired function is
indicated by the cursor > and confirm selection
by pressing ”SET”. The display will return to the
previous (higher) level submenu.
>Ignored
Flow Cont.
Recept ctrl
Cancel ▲ ▼ Set