User's Manual

SATELLINE-4Pro
User Guide v0.93 DRAFT
46
9.1.9 Restoring factory settings
Press ▲ or ▼ to move cursor >
to point to “Factory set-up”
selection and press ”SELECT” to
move on to the submenu.
Radio frequency
Radio settings
Addressing
Port 1
Port 2
Additional
Test
>Factory setup
LCD-Contrast
Exit ▲▼ Select
Press ”YES” and all radio
modem configuration settings
will return to factory settings
(which are the ones that the
modem was delivered).
Do you want to
restore factory
settings?
NO YES
9.1.10 Adjusting the contrast of the LCD-display
Press ▲ or ▼ to move the
cursor > to point to “Contrast”
selection and press ”Select” to
move on to the submenu.
Radio frequency
Radio settings
Addressing
Port 1
Port 2
Additional
Test
Factory set-up
>LCD-Contrast
Exit ▲ ▼ Select
The display will show the current
value of contrast. To modify
contrast setting press ”Change”.
Display contr.
3
Back Change
Press ▲ o
r
▼ until the cursor > points to the desired
contrast level value. Confirm selection by pressing
”SET”. The display will return to the previous (higher)
level submenu.
NOTE: The modified contrast value will actually take
effect only after the radio modem is switched out from
Programming Mode back into Data Transfer Mode.
NOTE: The starting position of the cursor indicates the
previously set value.
1
2
>3
4
5
Inverted
Cancel ▲▼ Set