User's Manual

SATELLINE-4Pro
User Guide v0.93 DRAFT
53
Transmission:
Transmission address has been set OFF.
Radio modem will transmit the data
packet as such.
Transmission addressing has been set ON.
The radio modem will add the primary TX
address to the beginning of the data
packet.
Reception:
Reception addressing has been set ON and
either the primary or secondary RX address of
the radio modem is identical to the address of
the received data packet.
The radio modem will remove the address and
send the actual data to the RS-232 interface.
However, if the ”RX Address to RD-line”
setting is on, the radio modem does not
remove the address.
Reception addressing has been set ON,
but both the primary and secondary RX
addresses of the radio modem are
different from the address of the received
data packet.
Data does not appear on the RS-232 -
interface.