User's Manual

SATELLINE-4Pro
User Guide v0.93 DRAFT
58
11 INSTALLATION
11.1 Installation of a Radio Data Modem
The radio modem should be installed with the installation accessories supplied with the radio
modem.
11.1.1 RS-232 Wiring
NOTE! In SATELLINE-4Pro the voltage is limited to 16V.
NOTE!
When selecting a suitable location for the radio modem it must be ensured that no water can
get into the radio modem under any conditions. Direct sunlight is also to be avoided. It is not
recommendable to install the radio modem on a strongly vibrating surface. Suitable
dampening and/or isolation materials should be used in cases where the installation surface
will be subjected to vibration.