User guide

SATELLINE-3AS NMS / NMS Epic / NMS 869 / VHF
User Guide, Version 1.0
21
2.5
Order information
In order to ensure the correct deliveries of SATELLINE-3AS(d) NMS radio modems, the customer
should specify the information listed below in the order form.
The following information MUST be provided in the order form:
1. General
• Name and the SATEL code of the radio modem
• Quantity of the items
• Company name, delivery address, telephone / fax number and contact person
• Purchase order number
• Date of the order
• Country of destination
2. Radio frequency information
• Operating frequency or limits of the required frequency bands (refer to the table below)
• Channel spacing (25, 12.5 or 20 kHz)
Table 2.1. Available RF bands of SATELLINE-3AS NMS / NMS Epic / NMS 869 / VHF
Product variant Frequency bands available Channel spacing available
SATELLINE-3AS(d) NMS 380–470 MHz
Note: the tuning range of SATELLINE-
3AS NMS is ±1MHz from the nominal
center frequency.
12.5 kHz / 20 kHz / 25 kHz
SATELLINE-3AS(d) NMS Epic 400-470 MHz
Note: the tuning range of SATELLINE-
3AS NMS Epic is ±1MHz from the
nominal center frequency.
12.5 kHz / 20 kHz / 25 kHz
SATELLINE-3AS(d) NMS 869 869.400 - 869.650 MHz
(License exempt 500 mW sub-band)
25 kHz only
SATELLINE-3AS(d) VHF 138–174 MHz and 218-238 MHz
Note: the tuning range covers the whole
radio board range (138 – 160, 155 –
174 or 218 – 238 MHz)
12.5 kHz / 25 kHz
Note1: The radio modem is shipped with all the other settings according the default
setup, unless otherwise specifically ordered. See the next chapter for the default
settings.
Note2: The regulations set by the local authorities must be taken into account in the
use of the radio frequency bands!
3. Order for possible accessories (antennas, cables, adapters, filters)