User guide

SATELLINE-3AS NMS / NMS Epic / NMS 869 / VHF
User Guide, Version 1.0
23
Table 2.4. SETTINGS of SATELLINE-3AS NMS / NMS Epic / NMS 869 / VHF
FIXED SETTINGS defined at the time of order (these settings can be changed only
in SATEL manufacturing premises)
Setting Value Notes
Frequency band(s) limits Specified in the order form! See table 2.1.
Channel spacing Specified in the order form! See table 2.1.
ADJUSTABLE SETTINGS ( user can change these settings later on )
Setting Default value Notes
Operating frequency Centre of the Frequency band
(Exception: 3AS NMS 869 is
delivered with 869.4125 MHz).
Any frequency inside the Frequency
band(s). The receiver and the transmitter
frequencies can be defined individually.
TxPower 1 W (3AS NMS and VHF)
10 W (Epic)
0.5 W (NMS 869)
See Chapter 6.1
RSSI threshold -112 dBm (12.5 kHz, 20 kHz)
-114 dBm (25 kHz)
See Chapter 6.2
FEC OFF See Chapter 6.3
TxDelay 0 ms See Chapter 6.7
SyncInterval default (=21845 bytes) See Chapter 6.8
RxDelay 0 ms
Error check OFF See Chapter 6.4
Network mode Basic Tx-priority See Chapter 7
Serial port 1 settings Port function=DATA
Data speed=19200 bps
Data bits=8
Parity=None
Stop bits=1
See Chapter 5
Serial port 2 settings: Port function=NMS
Data speed= 9600
Data bits=8
Parity=Even
Stop bits=1
Interface level=RS232
See Chapter 5
Handshaking settings CTS=Clear to send
RTS=Ignored
CD=RSSI threshold
Pause length=3 bytes
Handshaking lines apply to the DATA
port.
See Chapter 5.6
SL commands OFF See Chapter 13
LCD-read-only OFF See Chapter 10
Modem name "Modem_Name" User can give any descriptive name that
will be shown on the LCD,
Programming menu and Satel NMS PC.
NMS & NETWORK LEVEL SETTINGS (for example routing, topology of the system, terminal
addresses, user protocols) are configured using SATEL NMS PC PROGRAM.
The configuration can be performed by the customer, local SATEL representative (contacts on
www.satel.com  Distributors) or SATEL Network Design Centre ([e-mail]) with all the necessary
details concerning the system before ordering).