User guide

SATELLINE-3AS NMS / NMS Epic / NMS 869 / VHF
User Guide, Version 1.0
57
10.3
How to use menus
The main menu is used to select the desired
submenus. The setting modifications are performed
using these submenus. It is possible to jump back to
the previous (higher) level in the menu hierarchy by
pressing the ”BACK”-button at any time (same
button serves also as CANCEL and EXIT depending
on the particular submenu).
The  symbol on the left column indicates the active
selection or the current value of the setting.
Pressing  or  button either scrolls in the menu
or modifies parameters with numerical values
consisting of digits. Use  or  button until the
desired value is reached.
The inverted text shows the cursor line.
”SELECT/OK”-button confirms the selection.
10.4
Menu structure
10.4.1
Main menu
The main menu allows the user to choose from several functional parameter groups. The sub-
menu choices will appear in the following order:
• Radio settings
• Network mode
• Serial Port 1 settings
• Serial Port 2 settings
• Handshaking
• Additional settings
• Tests & Counters
• Restore Factory settings
Each of the submenus is described in detail in the following paragraphs.