User guide

SATELLINE-3AS NMS / NMS Epic / NMS 869 / VHF
User Guide, Version 1.0
64
10.5
Example of changing a setting
The following example shows how to change any parameter value using the push buttons and
the LCD display of the radio modem.
Example:
The data speed of the Serial Port 1 is changed to 1200 bps by following the steps:
1. Go to SETUP – MAIN MENU by pressing the S
SETUP
button.
2. Go to the Serial Port 1 submenu by scrolling with the
 buttons until the cursor is
pointing at the Serial Port 1 selection. Press the S
SELECT
button.
3. Go to the port speed submenu by scrolling with the  buttons until the cursor is pointing
at the data speed (bps) selection (9600 bps in this example). Press the S
SELECT
button.
4. Select the desired value (1200 bps in this example) by scrolling with the
 buttons until
the cursor is pointing at the correct selection. Press the S
SELECT
button.
5. Press the B
BACK
button and note that the display will now show the port speed as 1200
bps (value has been changed).
6. Press B
BACK / EXIT
button until the “
“Save settings?”
is displayed. Confirm the
change by pressing Y
YES
or change back to the previous value by pressing N
NO
. The
display will now return to the main screen.
SERIAL PORT 1
DATA
1200 bps
8 bit data
None Parity
BACK ?? SeLECT
SERIAL PORT 1
DATA
9600 bps
8 bit data
None Parity
BACK ?? SeLECT
SERIAL PORT 1
1200 bps
2400 bps
4800 bps
BACK ?? SeLECT
SAVE SETTINGS?
NO ?? YES
----dBm 12.5V
MODEMNAME
? Setup
MAIN MENU
Network Mode
Serial Port 1
Serial Port 2
Handshaking
EXIT ?? SeLECT
1 2 3
4 5 6