User guide

SATELLINE-3AS NMS / NMS Epic / NMS 869 / VHF
User Guide, Version 1.0
79
14
INSTALLATION
14.1
Installation of the radio modem
The radio modem should be installed with the installation accessories supplied with the radio
modem. There is also available an installation component for mounting the radio modem to a
DIN rail.
1. Installation with the
installation plate supplied
with the radio modem. The
installation plate is
fastened to the backside of
the radio modem.
The installation plate can
be mounted using the holes
provided on the plate.
2. Installation using the
Velcro-tape provided
with the radio modem.
3. Installation can also be
made directly to customer’s
equipment.
NOTE!
When selecting a suitable location for the radio modem it must be ensured that no water can
get into the radio modem under any conditions. Direct sunlight is also to be avoided. It is not
recommended to install the radio modem on a strongly vibrating surface. Suitable
dampening and/or isolation materials should be used in cases where the installation
surface will be subjected to vibration.