User's Manual

SATELLINE-3AS
User Guide, Version 2.2
56
The maximum useable sensitivity of the receiver is determined by the channel spacing (=radio
interface data transfer speed) and also by error correction (utilised or not). For further
information see Chapters 3.2, 10.3, 11.1 and 11.2.
In environments with high levels of interference, and when connection distances are short, it is
often beneficial to use a ”Signal threshold level” value, which is approximately 10 – 20 dBm
above the maximum sensitivity level. This will prevent unnecessary receive attempts caused by
noise.
NOTE !
NOTE !NOTE !
NOTE !
The setting of the transmitter output power of the radio modem to levels in contradiction with
transmitter power levels regulated by local or other governmental authorities is strictly
forbidden. Use or intended use of forbidden transmitter power levels may lead to prosecution
and penalties. SATEL is not responsible for any illegal use practised with any devices
manufactured and/or sold by SATEL and is not liable to pay any damages or compensation
caused by such illegal use.