User's Manual

SATELLINE-3AS
User Guide, Version 2.2
63
Select RTS line action property
-------------------------------
1) Ignored
2) Flow control
3) Reception Control
Enter selection or ESC to previous menu >2
Serial port 1 and 2 Handshaking
-------------------------
1) CTS line property TX buffer state
2) CD line property Data on channel
3) RTS line property Flow control
Enter selection or ESC to previous menu >ESC
Now all of the modifications of the example have been performed and the new values are
displayed on the LCD-display (see above):
9.1.6 Special functions
Special functions are modified by selecting from the main menu selection ”7”. (For further
information see the relevant Chapters describing the said functions). The current values of the
parameters are displayed and can be modified in toggle-type fashion by choosing the
appropriate parameter selection number (as described in Chapter 9.2) from the list displayed.
The next menu level will then enable the modification of the values (within allowed limits).
Enter selection >7
Additional set-up
Toggle ON/OFF values. Current value shown.
------------------------------------------
1) Error correction OFF
2) Error check OFF
3) Repeater OFF
4) SL-commands OFF
5) Priority TX
Enter selection or ESC to previous menu >ESC