User's Manual

SATELLINE-3AS
User Guide, Version 2.2
76
9.2.6 Selecting special functions
Press
ý
or
þ
until the cursor > points to
“Additional” selection and press
”SELECT” to move on to the submenu.
RF frequency
Radio settings
Addressing
Port 1
Port 2
>Additional
Test
Factory setup
Contrast
EXIT ýþ Select
Press ý or þ until the cursor > points to
the setting to be modified. Press
”CHANGE” to toggle the status of the
said parameter from ”ON” to ”OFF”
and vice versa. Press ”CHANGE” until
the parameter has the desired status.
Repeat for all special functions to be
modified and finally confirm all changes
by pressing ”BACK”. The display will
return to the previous (higher) level
submenu.
>Error corr. OFF
Error check OFF
Repeater OFF
SL-commands OFF
Priority TX
BACK ýþ Change
9.2.7 Activating tests
Press
ý
or
þ
until cursor > points to
“Tests” selection and press ”SELECT” to
move on to the submenu.
RF frequency
Radio settings
Addressing
Port 1
Port 2
Handshaking
Additional
>Tests
Factory set-up
Contrast
EXIT ýþ Select
Press
ý
or
þ
until cursor > points to the
test that is to be initiated. Press
”CHANGE” to toggle the status of the
selected test from ”ON” to ”OFF” and
vice versa. Press ”CHANGE” until the
parameter has the desired status. After
the tests have been set to desired states
confirm all changes by pressing ”BACK”.
The display will return to the previous
(higher) level submenu.
>Short Block OFF
Long Block OFF
BACK ýþ Change