User's Manual

SATELLINE-3AS
User Guide, Version 2.2
81
10 INSTALLATION
10.1 Installation of a Radio Data Modem
The radio modem should be installed with the installation accessories supplied with the radio
modem. There is also available an installation component for mounting the radio modem to a
DIN-rail.
1. Installation with the
installation plate supplied
with the radio modem. The
installation plate is fastened
to the backside of the radio
modem.
The installation plate can
be mounted using the holes
provided on the plate.
2. Installation using the
Velcro-tape provided with
the radio modem.
3. Installation can also be
made directly to customer
equipment.
NOTE!
NOTE! NOTE!
NOTE!
When selecting a suitable location for the radio modem it must be ensured that no water can
get into the radio modem under any conditions. Direct sunlight is also to be avoided. It is not
recommendable to install the radio modem on a strongly vibrating surface. Suitable
dampening and/or isolation materials should be used in cases where the installation surface
will be subjected to vibration.