User Instructions

TR326A KEY FUNCTION INSTRUCTION
1. The key1 is pressed,then the signal passes through the U1’s eighth foot
and arrives at U3,so the fan will turn OFF;
2. The key3 is pressed,then the signal passes through the U1’s eighth foot
and arrives at U2,so the fan will turn on HI speed;
3. The key5 is pressed,then the signal passes through the U1’s eighth foot
and arrives at U2,so the fan will turn on MED speed;
4. The key7 is pressed,then the signal passes through the U1’s eighth foot
and arrives at U2,so the fan will turn on LOW speed;
5. The key2 is pressed,then the signal passes through the U1’s eighth foot
and arrives at U2,so the light will turn on or off or DIM
6. The key4 is pressed,then the signal passes through the U1’s eighth foot
and arrives at U2,so the light goes out a minute later
7. The key6 is pressed,then the signal passes through the U1’s eighth foot
and arrives at U2,so the fan turns on the natual wind
8. The key8 is pressed,then the signal passes through the U1’s eighth foot
and arrives at U2,so the reciver is in anti-theft mode
9. “U2，R1，R2，R3， C1~9，X1，L1~L3”the components have an