User's Manual Part 1

VeriTracks™ User’s Manual
Satellite Tracking Of People 13
opposite side of the tag. Note: The ends of the clips must align with the ends
of the strap – as shown in photo below.
Correct alignment – end of
strap and clips are flush.
Incorrect alignment – end of strap and
clips are not flush.
4. Check the fit. Once you have the strap attached, check the fit of the tag. The
tag should be tight to prevent it from
banging against the ankle. No more
than two fingers should fit between
the strap and the ankle.
5. Press the Status Call Button. This
ensures that the tag is operational
and clears any tamper alarms. When
pressed, the button makes an audible
tone.
Enrolling a New Tracked Offender in VeriTracks™
Do not assign the BluTag® (using the Assign Tab) to the offender in
VeriTracks™ until the tag is attached to the Offender’s leg.
To enroll a new offender in VeriTracks™:
1. Mouse over the Supervision menu option
2. Select Enrollment, then click the Enroll New Offender link to add a new
offender to the system. There are five tabs/areas for enrollment: Profile,
Address, Tracking Device, Zones, and Event Control.
Note: only people in your office can access the enrollment screens for your
offenders. VeriTracks™ restricts access to the enrollment data to prevent
accidental changes.