User's Manual Part 1

VeriTracks™ User’s Manual
Satellite Tracking Of People 18
Notes on un-enrollment:
A. When you un-enroll the offender, VeriTracks™ orders the tag into a deep
sleep. The deep sleep command will turn the tag off indefinitely.
B. Attaching the charging coupler is the only way to activate the BluTag®.
The BluTag® will wake up and enter its normal Wake / Sleep cycle currently
defaulted to 60 minutes on and 1 minute off
C. If a tag will be reinstalled on an offender in the next 24 hours, we
recommend immediately placing the tag on a charger and keeping it there
until it is reinstalled.
Removing the Strap
1. After un-enrolling an offender, cut the strap to
remove the tag from his or her ankle.
ONCE THE OFFENDER HAS LEFT
2. Using the supplied screwdriver, remove the four
tamper-proof screws
3. Pry the bridge off the tag
4. Remove and discard the old straps and clips.
5. Replace the bridge using the four tamper proof screws
Changing a Tag on an Offender
Occasionally you may need to remove a device from an offender’s ankle due to
service issues or damage and replace it with a new one. You can either un-enroll
and re-enroll the offender or go directly to the Tracking Device tag of Offender
Enrollment.
Following the same procedures as described for assigning a tag, you can select the
new one from the drop down list. When selecting a new tag, a second drop down list
is activated to capture the reason the original tag is being changed. Again, for
agencies that do not want to use this functionality, the “None” option is automatically
selected.