Instruction manual

- 8 -
3. Connections
3.1 Connecting to TV
z Connect the satellite signal from the LNB to the LNB IN connector.
z Connect the RCA connector at the back of the receiver to the RCA-in connector
on your TV set.
3.2 Connecting to Dish
z Connecting a fixed satellite dish to your receiver
Make your choice of which satellite you want to receive your signals from, and
have your dealer aim your dish at the requested satellite. Connect a coax cable to
your LNB and the other end directly to the LNB IN connector of your receiver.
z Connecting multiple fixed dishes to your receiver using a DiSEqC 1.0 switch
If you want to watch programs from more than satellites (For in instance from
Astra and from Hot Bird) it is advisable to use fixed dishes and a DiSEqC 1.0
switch. Connect the OUT connector of the DiSEqC 1.0 switch to the LNB IN
connector at the back of your receiver.
z Connecting a dish on a motorized positioner to your receiver
Another possibility to watch programs from multiple satellites is by mounting a dish
to a motorized DiSEqC 1.2 positioner. Connect the LNB with a coax cable to the
LNB IN connector of the positioner, and connect the OUT connector of the
positioner to the LNB IN connector at the back of your receiver.