Instruction manual

- 16 -
4.4.5 TP list
In this menu you can edit the TP
Frequency information.
Show TP of the designated satellite.
Signal power and quality is checked on
the base of current TP value.
z If you want to change to other TP in
the Frequency item use ◄/► button
or OK button, which will show the TP
list.
z Press RED button to add a new TP value, Green button to change the current
value, Yellow button to delete the current TP value, Blue button to scan by the
settings. You can operate correctly by the clew on the screen.
4.5 Edit Channels
This menu allows you to edit the
channels stored in the STB or add
favorite channels.
z Use the ▲/▼ button to select the item,
OK to enter the sub-menu.
4.5.1 Edit Channel List
This submenu allows you to edit the
channels stored in the STB. You can
select TV or Radio channels in an
alternative way by pressing the
TV/RADIO button. You can choose a
channel list group by pressing the SAT
button.
z Press ▲/▼ button to select channel.
z Press OK to rename the channel; the
keypad will be displayed.
z Similarly, you can edit the PID data using the Info and NUMERIC keys.
Note: The VIDEO PID, AUDIO PID and PCR PID are very important for optimal
satellite signal reception. We recommend you get professional advice where
available.